New chiral Schiff's bases with a 1,3,4‐thiadiazole ring in the mesogenic core: synthesis,mesomorphic and ferroelectric properties

Two new homologous series of chiral esters derived from Schiff's bases containing a 1,3,4‐thiadiazole unit (series 6 and 7) were synthesized and their liquid crystalline and ferroelectric properties investigated. All the compounds of series 6 exhibit SmC*–SmA dimorphism and the compounds of series 7 exhibit a SmC* phase. All the compounds of these series are ferroelectric liquid crystals.     

Gold‐Decorated Chiral Macroporous Films by the Self‐Assembly of Functionalised Block Copolymers

We describe a new and very versatile method to place chosen chemical functionalities at the edge of the pores of macroporous materials. The method is based on the synthesis and self‐assembly of inorganic block copolymers (BCPs) having chiral rigid segments bearing controllable quantities of randomly distributed functional groups. The synthesis of a series of optically active block copolyphosphazenes (PP) with the general formula [N?P(R‐O₂C₂₀H₁₂)_0.9(FG)_0.2]_n‐b‐[N?PMePh]_m (FG=‐OC₅H₄N ( 6 ), ‐NC₄H₈S ( 7 ), and ‐NC₄H₈O ( 8 )), was accomplished by the sequential living cationic polycondensation of N‐silylphosphoranimines, using the mono‐end‐capped initiator [Ph₃P?N?PCl₃][Cl] ( 3 ). The self‐assembly of the phosphazene BCPs 6 – 8 led to chiral porous films. The functionality present on those polymers affected their self‐assembly behaviour resulting in the formation of pores of different diameters (D_n=111 ( 6 ), 53 ( 7 ) and 77 nm ( 8 )). The specific functionalisation of the pores was proven by decorating the films with gold nanoparticles (AuNPs). Thus, the BCPs 6 and 7 , having pyridine and thiomorpholine groups, respectively, were treated with HAuCl₄, followed by reduction with NaBH₄, yielding a new type of block copolyphosphazenes, which self‐assembled into chiral porous films specifically decorated with AuNPs at the edge of the pores.     

基于纯方位的浅海距离特征量解算分析

目标辐射噪声的LOFAR图中的干涉条纹包含了目标的运动参数和环境信息。当LOFAR图中的干涉条纹模糊或缺失时,其中的目标距离信息将无法提取。对于匀速直线运动的声源目标,仅利用方位信息,通过构造距离特征量和目标方位的关系模型,给出了一种浅海估计距离特征量的补充方法。浅海数值仿真和实验验证表明了该方法的可行性和有效性。     

单矢量水听器估计目标方位的方法与实验

为评估基于单矢量水听器的方位估计能力,在黄海海域对矢量水听器进行实验。矢量水听器吊放于接收船尾部,采用平均声强器和复声强器方位估计方法,并提出以概率密度值最大的方位角作为目标方位估计值的具体处理准则,对恒定方向、匀速行驶的目标船方位进行估计,并求出两种方法的方位估计误差。结果表明,水听器布放深度10 m时,对正横距离为0.42 km的航速10 kn的目标船,平均声强器方法的水平方位角估计误差18°,极角估计误差为5°,可以在离目标船最远1.17 km处估计其方位;复声强法的水平方位角估计误差为13°,极角估计误差为8°,可以在离目标船最远2.35 km处估计其方位。在有接收船的噪声干扰情况下,复声强器比平均声强器方法估计的方位更准确,可以对更远处的噪声源进行方位估计。     

Surface Tension of Binary Mixtures of 1-Alkyl-3-Methyl-Imidazolium Bis(trifluoromethylsulfonyl)imide Ionic Liquids with Alcohols

New experimental surface tension data have been provided at 283.15, 298.15, 313.15 K and atmospheric pressure for binary mixtures of 1-butyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)imide and 1-octyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)imide ionic liquids with the alcohols: methanol, ethanol, 1-propanol, 2-propanol, l-butanol and 1-pentanol. The experimental results show that the surface tensions of these mixtures depend systematically on the alkyl chain length of the ionic liquid and alcohol, composition and temperature. Surface tension changes on mixing have been calculated and adequately fitted by the Redlich–Kister polynomial equation. The adjustable parameters and the standard deviations between experimental and calculated values are reported.     

Fe(II) Spin Crossover/Polymer Hybrid Materials: Investigation of the SCO Behavior via Temperature-Dependent Raman Spectroscopy,Physicochemical Characterization and Migration Release Study

Polymeric composites constitute an appealing class of materials with applications in various fields. Spin crossover (SCO) coordination complexes are switchable materials with potential use in data storage and sensors. Their incorporation into polymers can be considered an effective method for their wider practical application. In this study, Fe(II) SCO/polylactic acid hybrid polymeric composites have been prepared by film casting. The mononuclear coordination complex [Fe{N(CN)₂}₂(abpt)₂] was incorporated into polylactic acid. The morphological, structural and thermoanalytical characterization of the composite films were performed via scanning electron microscopy (SEM), attenuated total reflectance (ATR/FTIR), Raman spectroscopy and differential scanning calorimetry (DSC). In addition, the migration release study (MRS) of the SCO compound from the polymeric matrix into the food simulant 50% v/v water/ethanol solution was also examined via UV/Vis absorption. Of particular interest was the investigation of the SCO behavior of the coordination complex after its incorporation into the polymer matrix; it was accomplished by temperature-dependent micro-Raman spectroscopy. The described attempt could be considered a preparatory step toward the development of SCO-based temperature sensors integrated into food packaging materials.     

Onion‐like Multifunctional Microtrap Vehicles for Attraction–Trapping–Destruction of Biological Threats

A multifunctional motile microtrap is developed that is capable of autonomously attracting, trapping, and destroying pathogens by controlled chemoattractant and therapeutic agent release. The onion‐inspired multi‐layer structure contains a magnesium engine core and inner chemoattractant and therapeutic layers. Upon chemical propulsion, the magnesium core is depleted, resulting in a hollow structure that exposes the inner layers and serves as structural trap. The sequential dissolution and autonomous release of the chemoattractant and killing agents result in long‐range chemotactic attraction, trapping, and destruction of motile pathogens. The dissolved chemoattractant (l ‐serine) significantly increases the accumulation and capture of motile pathogens (E. coli) within the microtrap structure, while the internal release of silver ions (Ag⁺) leads to lysis of the pathogen accumulated within the microtrap cavity.     

Liquid–liquid equilibrium and interfacial tension of the ternary system heptane + thiophene + 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide

The liquid–liquid equilibrium (LLE) of the ternary system comprising heptane, thiophene and the ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([C₂mim][NTf₂]) was determined at 25 °C and atmospheric pressure, for preliminary evaluation of the potential of this ionic liquid as solvent for the desulfurisation of transportation fuels. Classical parameters such as solute distribution ratio and selectivity were calculated from the LLE data and subsequently analysed. The LLE data were also correlated by means of the ‘Non-Random Two-Liquid’ (NRTL) equation. Besides the LLE, another critical property for the design of extraction processes, namely the interfacial tension, was determined in parallel, throughout the immiscibility domain of the ternary system. For the first time, the LLE and the interfacial tension of a ternary system involving an ionic liquid are jointly reported.     

Complete NMR assignment of 3, 4‐seco‐lup‐20(29)‐en‐3‐oic acid from Decatropis bicolor

Complete ¹H and ¹³C NMR chemical shift assignments for 3,4‐seco‐lup‐20(29)‐en‐3‐oic acid ( 1 ) have been established by means of two‐dimensional COSY, HSQC, HMBC and NOESY spectroscopic experiments as well as by analysis of MS data. Compound 1 was isolated from Decatropis bicolor (Zucc.) Radlk. (Rutaceae) in addition to six coumarins and one alkaloid of known structure. Copyright © 2012 John Wiley & Sons, Ltd.